Thumbnail Filmstrip of W 165 A - 2 Ohm Images
Visaton Speaker Driver - W 165 A - 2 Ohm Type
Art. No. 9046
Visaton W 165 A - 2 Ohm
Characteristics and Sound Properties
This 16.5 cm (6.5") woofer is ideal for a range of applications. It has a black fibreglass membrane, metal basket and robust rubber surround giving it superior performance in extreme environmental conditions whether they be hot or cold. The bass output of this speaker makes it an ideal component for your outdoor system. *) IP protection class for front side when built into a sealed enclosure.
The design allows the maximum stroke and allows for a small installation space, with enormous sound pressure levels you will not need to fear a sudden limitation. This makes the W 165 A - 2 Ohm the perfect solution, especially when it comes to being robust.
Often suitable as a replacement for the factory fitted Audi SQ5 exhaust woofer / sound actuator, the A6, A7, SQ7 and SQ8; plus similar systems fitted to Golf GTD, Kodiaq RS, Porsche. Works very well with the existing housing and factory amplifier though there may be variations from vehicle to vehicle and professional installation is recommend as with all car audio products. Ensure compatibility and check the sizing first as there is no exact published compatibility lists.
Applications:-- Car subwoofer
- Outdoor sound systems
- Speakers for saunas
- Loudspeakers for solariums and damp rooms
- Speakers for boats and ships
- Sound modules in the vehicle area for noise simulation
- Active exhaust systems
- ANC systems for noise reduction
- Weatherproof
- Suitable for outdoor applications
- High temperature rating
Technical Specifications
Nominal load capacity | 60 W |
Nominal impedance Z | 2 ohms |
Transmission range (-10dB) | fu-5000 Hz |
Average sound pressure level |
84 dB (1 W/1 m) |
Boundary deflection | +/−10.3 mm |
Resonance frequency fs | 60 Hz |
Magnetic induction | 1.06 T |
Magnetic flux | 620 μWb |
Upper pole plate height | 6 mm |
Voice coil diameter | 31 mm |
Winding height | 15.3 mm |
Baffle opening | 144 mm |
Net weight | 1.26 kg |
DC resistance Rdc | 2.2 ohms |
Mechanical Q-factor Qms | 4.38 |
Electrical Q-factor Qes | 0.74 |
Total - factor Qts | 0.63 |
Equivalent air flow volume Vas | 7.84 l |
Effective piston area Sd | 136.2 cm² |
Dynamically moved mass Mms | 21.7 mm |
Drive factor Bxl | 4.99 Tm |
Voice coil inductance L | 0.56 mH |
Connections | 4.8 x 0.8 mm (+) 2.8 x 0.8 mm (−) |
Depth | 63.7 mm |
IP protection class | IP 64 *) | |
Temperature range |
|
*) IP protection class for front side when built into a sealed enclosure (gluing of the loudspeaker and a front cover (grille) might be necessary.)
Driver Dimensions
Loudspeaker Driver Dimensions and Measurements - all dimensions in mm (approx.)
Frequency and Impedance Response
Loudspeaker Frequency and Impedance Response Graph
Directivity Pattern
Loudspeaker Directivity Pattern (on and off axis response)