Thumbnail Filmstrip of RetroSound Radio Chevrolet Chevelle 1966-1967 Style Images

Please select your Motor option above when ordering, details are below for each feature set. Price will change accordingly.

Important! Please check the cut out size in your dash and dimensions before ordering: measurements of the radio are below. If you are unsure, measure the width and height of the cut out in your dash, plus measure centre to centre on any knob holes which are drilled separately and contact us, other configurations are possible. More on buying a RetroSound Radio here.

The RetroSound radio is available with two different feature sets:

Motor 6 Features:

Bluetooth for Phone Calls and Music Streaming.
Built-in DAB+ tuner (optional DAB antenna / adaptor required, select option)
AM / FM tuner with 30 memory presets
32000 colour LCD display plus dimmer setting
Built-in 4 Channel Amplifier: 25 Watts RMS True Rating / 45 Watts max. / 300 Watts (peak power) MOSFET amplifier
2x USB inputs for MP3 / WMA / FLAC file playback, USB is accessible via 15" / 38cm (approx.) on the back of the radio, optional USB Extension ports available.
2.1 Amp device charging via USB
1x Auxiliary/AUX 3.5mm input 7" / 18cm long approx., optional AUX Extension ports available
Pre-amp with six RCA outputs: 4 full channel plus dual subwoofer output with adjustment control
Made for iPod / iPhone
2 Year warranty
See below for more information on all motors for these radios.

Motor 1DAB-1 Features:

Bluetooth for Phone Calls and Music Streaming.
Built-in DAB+ tuner (optional DAB antenna / adaptor required, select option)
AM / FM tuner with 30 preset memories
White display only on LCD
Built-in 4 Channel Amplifier: 18 Watts RMS True Rating / 40 Watts max. / 275 Watts (peak power) MOSFET amplifier
1x Auxiliary/AUX 3.5mm input 5.5" / 14cm long approx., optional AUX Extension ports available
1 year warranty
See below for more information on all motors for these radios.

Common Features for Motor 1DAB-1 and Motor 6:

Dimensions (radio body): 4.34" x 2" x 4" = 110 x 51 x 100mm (D x H x W approx. - cables and mounts not included)
Power Requirements: 11.5 to 14.4 V DC (negative chassis) - Max. 15A
Output Speaker Impedance: 4 to 8 Ohm
Non-volatile memory (keeps settings and stations if battery is disconnected)
Selectable 12 / 24 hour clock
Removable front panel for advanced installs - optional extension cable available
Optional vintage look screen protectors are available (some radio configurations may include a specific screen protector film).
Works seamlessly with optional RetroSound Amplifiers
Compatible aerials
Compatible speakers
User Manual via download
Retro Manufacturing radios are a modular design. Assembly is required. This design allows for a more adjustable fit and to offer different style options. RetroSound Radios are only compatible with 12V negative grounding vehicles unless a voltage convertor is used.
Click here to check reception in your area.