SKU: RetroSound-MH-9 RetroSound MH9 Main Wire Harness Extension Cable 274cm

RetroSound Main Wire Harness 2.74m (9 Foot) Extension Cable

This harness extends your power related wires (12V constant, ignition, ground, remote amp and power antenna turn-on leads), as well as your 4 channels of speaker leads and 2 channels of dedicated subwoofer output (RCAs), to a location up to 274cm or 9 feet away from the body (Motor), face and control shafts of your RetroSound radio. This is very useful in custom installations, or in situations in where there is not enough room behind the dash for the radio body.

For example, after-market air conditioning often adds ducting behind the dash that would interfere with the radio body. With this extension cable you can mount your RetroSound radio almost anywhere, up to 9' away from the dash location.

Additionally, this main wire harness extension can be used with your RetroSound Quadraphonic amplifier, if the amp cannot be mounted in close proximity to your RetroSoundradio.

The harness of the Quadraphonic amp will plug directly in to this harness extension, which plugs directly in to your RetroSound radio, eliminating the need to cut and connect wiring in situations where the amp needs to be mounted further from the dash location of the radio.