Your Cart (0)
Thumbnail Filmstrip of RetroSound Radio Grand Prix Car Stereo Porsche Style Images
Porsche 1980's and 1990's Style Car Radio Upgrade
The RetroSound Grand Prix radio perfectly complements the interior styling of the 1980s and 90s Porsche vehicles while updating the audio technology to today's standards. With the classic appearance of the iconic Becker Grand Prix, Mexico or Europa model radios, the unique design of the Grand Prix features authentic paddle-style controls along with low profile push-buttons, and includes Bluetooth phone, music streaming and DAB, along with AM and FM and more features. The Grand Prix includes a new DIN Kit that makes it easy to install and achieve a factory-like fit.
This radio mounts in a standard single DIN slot; dash hole dimensions required are 180mm x 50mm or 7 x 2 inch (approx.)
Suitable for the following models though check sizing as above. More models may be possible, please contact us if there is any doubt.
- 1980-1985 Porsche 911
- 1980-1982 Porsche 924
- 1980-1985 Porsche 928
Please select your Motor option above when ordering, details are below for each feature set. Price will change accordingly.
Important! Please check the cut out size in your dash and dimensions before ordering: measurements of the radio are below. If you are unsure, measure the width and height of the cut out in your dash, plus measure centre to centre on any knob holes which are drilled separately and contact us, other configurations are possible. More on buying a RetroSound Radio here.
The RetroSound radio is available with two different feature sets:
Motor 6 Features:
- Bluetooth for Phone Calls and Music Streaming.
- Built-in DAB+ tuner (optional DAB antenna / adaptor required, select option)
- AM / FM tuner with 30 memory presets
- 32000 colour LCD display plus dimmer setting
- Built-in 4 Channel Amplifier: 25 Watts RMS True Rating / 45 Watts max. / 300 Watts (peak power) MOSFET amplifier
- 2x USB inputs for MP3 / WMA / FLAC file playback, USB is accessible via 15" / 38cm (approx.) on the back of the radio, optional USB Extension ports available.
- 2.1 Amp device charging via USB
- 1x Auxiliary/AUX 3.5mm input 7" / 18cm long approx., optional AUX Extension ports available
- Pre-amp with six RCA outputs: 4 full channel plus dual subwoofer output with adjustment control
- Made for iPod / iPhone
- 2 Year warranty
- See below for more information on all motors for these radios.
Motor 1DAB-1 Features:
- Bluetooth for Phone Calls and Music Streaming.
- Built-in DAB+ tuner (optional DAB antenna / adaptor required, select option)
- AM / FM tuner with 30 preset memories
- White display only on LCD
- Built-in 4 Channel Amplifier: 18 Watts RMS True Rating / 40 Watts max. / 275 Watts (peak power) MOSFET amplifier
- 1x Auxiliary/AUX 3.5mm input 5.5" / 14cm long approx., optional AUX Extension ports available
- 1 year warranty
- See below for more information on all motors for these radios.
Common Features for Motor 1DAB-1 and Motor 6:
- Dimensions (radio body): 4.34" x 2" x 4" = 110 x 51 x 100mm (D x H x W approx. - cables and mounts not included)
- Power Requirements: 11.5 to 14.4 V DC (negative chassis) - Max. 15A
- Output Speaker Impedance: 4 to 8 Ohm
- Non-volatile memory (keeps settings and stations if battery is disconnected)
- Selectable 12 / 24 hour clock
- Removable front panel for advanced installs - optional extension cable available
- Optional vintage look screen protectors are available (some radio configurations may include a specific screen protector film).
- Works seamlessly with optional RetroSound Amplifiers
- Compatible aerials
- Compatible speakers
- User Manual via download
- Retro Manufacturing radios are a modular design. Assembly is required. This design allows for a more adjustable fit and to offer different style options. RetroSound Radios are only compatible with 12V negative grounding vehicles unless a voltage convertor is used.
- Click here to check reception in your area.
RetroRadio Grand Prix Dimensions (Approx.)