SKU: Beijer-BCI8UDS-CANBUS Beijer CANBUS BCI-8UDS Multi Output Interface

Beijer Automotive BCI-8UDS CANBUS Interface 12V and 24V - Covers over 500 cars!

The BCI-8UDS is a truly universal CAN interface and is ideal for connecting trailers and roof bar lights via relays when the vehicle itself cannot control them directly. It supports over 500 cars makes and models with a CAN Bus system. This means that only one unit is required as it covers all the vehicles listed without any extra programming! Note that once installed, it is locked to that vehicle. We can reprogram them if required at additional cost. Connecting a BCI is quick and easy. Once connected to a constant power supply (12V / 24V DC), a ground and two CAN wires, the BCI will automatically determine the car make and type, after which it will send normal analogue style signals to the relevant outputs. Plus with the help of the free in-car instruction via an Internet login that comes with every BCI, locating the CAN connections in the car is easy too from the huge online database.

Outputs (Vehicle dependant):-

• Speed pulse
• Low beam
• High beam
• Brake
• Left direction indicator (LDI)
• Right direction indicator (RDI)
• Switched power
• Parking light

Specifications:-

• Power Supply: 7.5V DC to 32V DC
• Maximum current consumption (unloaded): Normal mode: < 80mA ~ 12/24V
• Sleep mode: < 1.5 mA ~ 12V / 24V
• Outputs: all outputs are protected against short-circuit to power supply and ground.
• Digital Outputs:
  • Voltage range: Supply from 7.5V to 32V
  • Pull-down to ground
  • Max. current: 500mA per output
  • Thermal protection
• Frequency / Digital Outputs:
  • 10V with pull-down to ground
  • Max. freq. 2 kHz
  • Max. current: 50mA/output
• Digital Outputs 10V:
  • 10V with pull-down to ground
  • Max. current: 50mA per output
• Note: pull down to ground is a digital low signal, not directly connected to ground / chassis.
• Temperature: Operating temperature: -40 °C / +85 °C
• Protection level: IP40