SKU: Beijer-BCI6-CANBUS Beijer CANBUS BCI-6 Multi Output Interface

Beijer Automotive BCI-6 CANBUS Interface 12V / 24V - Covers over 500 cars!

The BCI-6 is a truly universal CAN interface. It supports over 500 cars makes and models with a CAN Bus system. It supports many makes and models with a CAN Bus system as listed below. This means that only one unit is required as it covers all the vehicles listed without any extra programming! Note that once installed, it is locked to that vehicle. We can reprogram them if required at additional cost. Connecting a BCI is quick and easy. Once connected to a constant power supply (12V / 24V DC), a ground and two CAN wires, the BCI will automatically determine the car make and type, after which it will send normal analogue style signals to the relevant outputs. Plus with the help of the free in-car instruction via an Internet login that comes with every BCI, locating the CAN connections in the car is easy too from the huge online database.

Outputs (Vehicle dependant):-

• Speed pulse
• Switched power supply (maybe known as accessories and ignition depending on the car system)
• RPM
• Engine Run
• Reverse
• Speed Switch <20km/h

Specifications:-

• Protection level: IP40
• Power Supply: 7.5V DC to 32V DC
• Maximum current consumption (unloaded): Normal mode: < 80mA ~ 12/24V
• Sleep mode: < 1.5 mA ~ 12V / 24V
• Outputs: all outputs are protected against short-circuit to power supply and ground.
• Digital Outputs:
  • Voltage range: Supply from 7.5V to 32V
  • Pull-down to ground
  • Max. current: 500mA per output
  • Thermal protection
• Frequency / Digital Outputs:
  • 10V with pull-down to ground
  • Max. freq. 2 kHz
  • Max. current: 50mA/output
• Digital Outputs 10V:
  • 10V with pull-down to ground
  • Max. current: 50mA per output
• Note: pull down to ground is a digital low signal, not directly connected to ground / chassis.
• Temperature: Operating temperature: -40 °C / +85 °C